Search results
Jump to navigation
Jump to search
Page title matches
- ...t your node and thus is very important. Your node can not connect to other Allstar nodes unless it is registered. To check if your node has registered go to t ...t takes 20 to 30 minutes for new registrations to propagate throughout the Allstar network. You should always leave your node powered on to keep your registra854 bytes (150 words) - 05:08, 28 January 2019
- 43 bytes (4 words) - 06:07, 22 March 2021
- = AllStar SIP Phone Configuration = ...shows how to set up a sip phone extension and allow it to connect with an AllStar node on the same server.2 KB (379 words) - 21:50, 25 November 2021
Page text matches
- ...t your node and thus is very important. Your node can not connect to other Allstar nodes unless it is registered. To check if your node has registered go to t ...t takes 20 to 30 minutes for new registrations to propagate throughout the Allstar network. You should always leave your node powered on to keep your registra854 bytes (150 words) - 05:08, 28 January 2019
- ...e servers which are located in different geographical locations. All valid Allstar nodes can then request and retrieve a copy of the master node list by runni ...k node number and Allstar Link access password. If you have forgotten your Allstar link access password, you can retrieve it from allstarlink.org, if you know3 KB (450 words) - 04:02, 27 January 2019
- ...ed prefix digits, mandatory command codes, and suggested command codes for Allstar Link.''' These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users.3 KB (407 words) - 18:34, 30 April 2021
- === Requesting an Allstar Node Number for a Remote Base ===1 KB (218 words) - 14:16, 28 January 2019
- [allstar-sys] - used by the phone portal [allstar-public] - used by web transceiver1 KB (160 words) - 01:11, 20 January 2021
- ...ntroller, and wrote code to support that functionality. Jim also invented AllStar Link, a network of publicly-accessible amateur radio repeater and remote ba ...e conversation, Steve asked me if I could recommend anyone for taking over AllStar Link.3 KB (502 words) - 16:07, 12 March 2021
- * Allstar Registration422 bytes (70 words) - 04:58, 28 January 2019
- Allstar/app_rpt is a complete repeater (or simplex node) controller with VoIP linki * Voting and simulcast over IP networks with Allstar Radio Thin Client Module (RTCM).2 KB (328 words) - 14:18, 12 October 2018
- ...sions of AllStar you may need to create additional subdirectories. Current AllStar will create the node number subdirectory for you. You want to end up with a Restart Asterisk and you're all set. AllStar will create a recording for each COR activation and a daily log file. The r2 KB (367 words) - 14:24, 7 October 2023
- ...unt on this site to use it. However, if you would like to help us document AllStar then please do request an account using the link above. The items below are904 bytes (133 words) - 14:54, 28 January 2018
- AllStar supports custom node announcements or node names. These will be played in ...on producing a file in the format required for any custom announcement in AllStar.3 KB (406 words) - 20:08, 4 June 2020
- = AllStar SIP Phone Configuration = ...shows how to set up a sip phone extension and allow it to connect with an AllStar node on the same server.2 KB (379 words) - 21:50, 25 November 2021
- AllStar software runs on a dedicated Linux computer (including the Raspberry Pi) th AllStar is based on the open source Asterisk PBX and is released under the GNU GPL6 KB (922 words) - 05:47, 30 December 2022
- ...nt will attempt a connection to public node <code>node_nb</code> using the AllStar public authentication mechanism.843 bytes (120 words) - 00:38, 10 August 2021
- ...front we have incorporated as a 501(C)3 non-profit devoted to running the AllStar network and shepherding the development of app_rpt and asterisk for amateur | Visionary, Open Source advocate and principal developer of app_rpt, aka AllStar.3 KB (512 words) - 00:02, 17 November 2021
- ...x.conf configuration file controls defines how to register a node with the Allstar link node assignment authority, and assigns a context incoming connections * '''node''' is your assigned Allstar link node number4 KB (643 words) - 01:16, 20 January 2021
- = AllStar Node Number Extensions = ...xx9) node numbers. The reason xxxx has to be changed to xxxx0 is because AllStar would connect to node xxxx when attempting to dial node xxxx1.8 KB (1,359 words) - 13:44, 17 April 2022
- ...to have a blacklist for the web portal users you will need to modify the [allstar-public] context in extentions.conf [allstar-public]3 KB (472 words) - 05:07, 22 February 2021
- Occasionally there is a need to have an Allstar Link Server in an 'itinerant' location (one that is non-permanent and possi If the Server Proxy Server is the Allstar Network Registration Server, then6 KB (987 words) - 18:06, 8 April 2020
- ...no longer supported. It may not work well or at all but it's the only Web AllStar client around so give it a try. The attached PDF is the sum knowledge regar1,007 bytes (166 words) - 01:00, 27 January 2019
- The chan_echolink channel driver allows AllStar nodes to register on and communicate with the EchoLink network. The follow ...56, you would dial *3 followed by 3123456. As you can see we have reserved Allstar node numbers with a leading 3 for the Echolink number space.11 KB (1,693 words) - 18:37, 1 June 2023
- This page discusses some of the terminology used when configuring your AllStar Link node. | Stanza || A section in the various AllStar Link/Asterisk configuration files that are defined using square brackets.5 KB (817 words) - 16:29, 12 March 2021
- Transceive allows amateur radio operators to connect to their AllStar node from anywhere in the world. Operators can administer linked nodes, mon1 KB (203 words) - 03:25, 22 January 2021
- Allmon is a web site for managing one or more app_rpt (aka Allstar) nodes.1 KB (223 words) - 01:53, 8 March 2021
- ...cy agile multi port remote base. It is possible to interface the RBI-1 to AllStar, but only on a PC. = AllStar Settings =3 KB (441 words) - 04:12, 4 February 2021
- AllStar*CLI>iax2 show registry1 KB (195 words) - 21:40, 27 September 2018
- 2 KB (238 words) - 01:38, 28 January 2019
- :ASL is the software used to create an AllStar node. ASL nodes are a way of connecting Ham Radio (RF) equipment to the int ...r node by asking you a number of questions. You'll need to have created an AllStar account, created a server, requested a node number and have your node's pas13 KB (2,306 words) - 15:47, 31 December 2022
- ...be accomplished using the web page provided to Allstar Link users (see the Allstar Link Web Portal under 'server/Get APRS Password'). Otherwise, passwords may comment = AllStar Node 1999 ; Text to be displayed associated with this station5 KB (795 words) - 21:25, 27 September 2018
- = Allstar Link registration fails when behind a NAT router = = Cannot Receive Connections or Make Connections to Other Allstar Nodes =8 KB (1,294 words) - 21:13, 31 August 2023
- ...ages of this howto for more detail. Also read through all the links on the Allstar (<nowiki>https://allstarlink.org/</nowiki>) site BEFORE you login. Because2 KB (354 words) - 03:40, 2 January 2022
- ● updatenodelist.service loaded failed failed AllStar NodeList updater2 KB (346 words) - 02:25, 16 May 2018
- ...sound chips. These are inexpensive but feature rich USB Radio Adapters for AllStar Link. These can be used in either PCs or Raspberry Pis * [https://hamprojects.info/allstar/ All Products]11 KB (1,783 words) - 20:30, 21 March 2022
- = Contributing to the [https://github.com/AllStarLink/ASL-Asterisk AllStar Client Github Repository] =2 KB (371 words) - 14:35, 27 May 2023
- ...interfacing the Motorola Quantar to the RTCM/VOTER interface, for use with AllStar. *Receive Carrier Squelch (with AllStar generating a TX-only PL)18 KB (3,111 words) - 18:18, 20 March 2022
- ==AllStar Link Network -- VOTER Project (Voice Observing Time Extension (for) Radio)= ...icro-Node International] as their [http://www.micro-node.com/thin-m1.shtml AllStar RTCM].10 KB (1,612 words) - 21:43, 29 January 2022
- ...r which is run and creates entries/edits them on the records table in the 'allstar' database. This populates a SRV, TXT and A record for every node in the sy2 KB (376 words) - 23:43, 18 February 2023
- apt -y install allstar-helpers3 KB (412 words) - 16:52, 5 September 2023
- ...vate node numbers and they should not attempt to register or report to the AllStar network. Therefore you must edit "/etc/asterisk/iax_registrations_custom.co2 KB (359 words) - 16:40, 3 August 2019
- ...do not announce Echolink nodes at all, 1 = announce only the node number (Allstar-translated), 2 = announce only the call of the echolink station, 3 = announ3 KB (448 words) - 16:38, 21 December 2023
- * Repackage various AllStar pieces into new Debian packages2 KB (378 words) - 17:36, 2 January 2023
- ...is active, you will need a suitable PC or Raspberry Pi computer to install AllStar onto. ...ish to use a local FM repeater that is AllStar enabled, you do not need an AllStar account. Check out our [http://stats.allstarlink.org/ Active Nodes List] to15 KB (2,579 words) - 13:33, 14 March 2021
- Private nodes are nodes you create that do not connect to the Allstar Network by default and are not connectable from the ASL network by default.3 KB (559 words) - 00:12, 17 July 2022
- Node names are in format of ''usb_<nodenumber>''. Where <nodenumber> = the AllStar Link node of your system. ''Note that usb and the node number are separate Allstar denoted pins pp9 through pp12 are 'Input pins' listed as 'A#' in the parall9 KB (1,281 words) - 01:26, 22 January 2024
- After you have your account and feed credentials, you are ready to setup Allstar.5 KB (698 words) - 21:02, 12 August 2023
- '''Calibrating Audio Levels For The Allstar Link System'''6 KB (981 words) - 03:49, 2 January 2022
- ...reproduced here as I find myself needing easy access to these when modify Allstar configuration. * This application, the heart of the AllStar network and using asterisk as a repeater,12 KB (1,768 words) - 17:12, 3 December 2022
- '''Nothing here is relevant to current versions of AllStar.''' ...e now ready to run <code>nodesetup</code> to configure your system for the Allstar Link.13 KB (2,126 words) - 05:14, 25 January 2019
- ...e RTCM (and [[VOTER-Hardware | VOTER]]) interfaces are typically used with AllStar in voting/simulcast applications. They '''MAY''' be used for '''ANY''' repe7 KB (1,098 words) - 18:08, 20 March 2022
- Allstar is an open-source project licensed under the GPL based on [https://www.aste10 KB (1,656 words) - 02:14, 28 January 2018
- Node names are in format of ''usb_<nodenumber>''. Where <nodenumber> = the AllStar Link node of your system. ''Note that usb and the node number are separate9 KB (1,295 words) - 01:27, 22 January 2024
- ...ed here. Only place a definition for your local nodes, and private (off of allstar link) nodes or nodes behind the same NAT router here. ...looks in the [nodes] stanza first then searches (what could be called the Allstar DNS) the /var/lib/asterisk/rpt_extnodes file.43 KB (6,251 words) - 18:12, 10 June 2023
- ...e RTCM (and [[VOTER-Hardware | VOTER]]) interfaces are typically used with AllStar in voting/simulcast applications. They '''MAY''' be used for '''ANY''' repe12 KB (1,937 words) - 18:07, 20 March 2022
- At this point, if you have a properly configured AllStar host (including settings in <code>voter.conf</code>), re-connecting the Eth20 KB (3,245 words) - 18:15, 20 March 2022