Search results

Note: You should also note the implications of having a shorter sleeptime than ID interval.

''Note: This user does not have a password assigned or a shell. This will preve ''Note: Leave password blank''

Note: When specifying an ID message file in rpt.conf, you might omit the extensi A final note to check/change file ownership and permissions appropriately for files you

Note that you will also need to install Apache or lighttpd(small memory footprin # Note: 'llcgi' is the default password according to the initial node setup. Howev

macro=macro ; <===== note this in your rpt.conf ...sure timing has no interference before you actually need to use them. And note that use of our macro #2 might possibly also require us to create a new one

Note that the addresses can extend beyond this but the address must match the py Also important to note that USB to parallel converters can not be 'bit-banged' to function on linu

Note required that you are using dsp functions of USBRadio and proper tone confi

...daily log file. The recordings are named 20221216115590.WAV for example. Note that .wav and .WAV are not the same exact format. Download and erase the .W ...dition/asterisk-book-html-chunk/Monitoring_id264504.html asterisk logger]. Note the dangerous warnings provided with the use of the asterisk logger.

{{ Note|This is outdated information as of 2021-01-17. A new stats server has been '''Note: The db hangs from time to time and one needs to run a cron job of /usr/loc

NOTE: The UDP port pair must start with an even port number. The even port is fo NOTE: You must be running at least version 0.47 of TheLinkBox to use this featur

...vity timer at initialization, or 0 to leave it disabled. The default is 0. Note: If the activity timer is disabled in rpt.conf, it can still be enabled wit ...file to play locally when there is 30 seconds left on the activity timer. Note: Do not include the extension name of the sound file. If no path is specifi

{{Note|'''This is experimental infrastructure and should not be considered for per Note that servers not in nodes list can appear in DNS, there is no ageing out of

'''Note:''' If the activity timer is disabled in rpt.conf, it can still be enabled '''Note:''' Do not include the extension name of the sound file.

Note: ''We'll be adding a "What to do if my node is not registered" to the trou

''Note'': Requires app_rpt.c version 0.186 or later. NOTE: The Foreign Link COP methods only work from the user on the foreign link,

Note: You will need to issue an iax2 reload command from the Asterisk Command li Please note that in the ACID Distribution, node registration is automatically configure

{{ Note|'''This document is obsolete and is only for older ACID installations ''' } ...s coded to always get its scripts and other files from dl.allstarlink.org. Note, the install disk is based off of Centos 5.X, but that could change at some

Note the sender isn't parsed properly. The format is I, E, S, C based on the type of call received. Note this is a subset of the MDC-1200 protocol, but it would be quite easy to ex

Note: These instructions are currently a Work In Progress. You are going to ha Note: If you have made any changes and just wish to update the binaries without

'''Note:''' If you are enabling it on a VOTER/RTCM, you would '''not''' want to ena

{{Note|'''Using radioless software often requires setup of a stanza in your iax.co

...enumber>''. Where <nodenumber> = the AllStar Link node of your system. ''Note that usb and the node number are separated by an underscore (_) character.' ...simpleusb.conf file from an older installation (i.e., ACID), take special note of the change in naming. When a exact match is not made, the settings that

Note: This Bill of Materials is for the BOTH halves of the board.

{{ Note|'''This only works for ASL distributions and may not exist on others. Use a

Set your node password. Note: No special characters allowed, letters and numbers only.

''Note:'' A stanza is also called a context in Asterisk PBX terminology, particula

{{ Note|'''You may already have a stanza named [iaxrpt] in your iax.conf. You may r

...5 and 6 many times. It takes a while to sort it all out, stick to it. Make note of the password prompt for the root user. Many first time Linux installers

..., you may use the Parrot Once COP method to enable one cycle of parotting. Note: The recording will start right away, the user should not unkey their micro

...generator until further adjustment does not increase the deviation. Make a note of the peak deviation at this point. ...our radio is a remote base or simplex node, use the half-duplex procedure. Note: if you have a URI, the automated setup procedure should have set the recei

But note that you are not going to copy paste any instructions at the command line l Also Note: Your mouse will not function inside the CONSOLE window.

# Note: If the call sign you are requesting is already registered with AllStarLink

...he switch may be TURNED OFF and the system will continue running normally. Note, if SW2-3 is ON during this procedure, the “Diode Calibration” process ...high, or slowly to indicate that the discriminator noise level is too low. Note, if SW2-3 is ON during this procedure, the "Diode Calibration" process will

Note: The ASL 1.01 installer is a Network installer and still uses the '''dvswi

...master/VOTER-pcb/KiCAD-schematic/VOTER_2022-01-22.pdf schematic], you will note that there are two Audio Select lines (ASEL1/ASEL2) connected to the 74HC40 ...tive filters to be disabled on the VOTER client they are configured for. ''NOTE:'' this is only true if there is a valid host connection.

Note that this feature simply selects the receiver with the best signal strength

* Note that due changes in later versions of asterisk, you cannot simply drop this * \note Serious contributions by Steve RoDgers, WA6ZFT <hwstar@rodgers.sdcoxmail.co

NOTE: Since the semicolon (';') is recognized by the ? - Portable tent (note different then standard ';')

The '''DSPBEW''' versions have Jim's DSP/BEW feature enabled. Note that due to the size of this feature, the ''diagnostics menu'' is '''NOT''' *Attach the PICKIT2/PICKit3 device to J1 on the VOTER board. Note that Pin 1 is closest to the power supply modules (as indicated on the boar

Note: although 'RPT_NUMLINKS' ''is'' an Integer count of links, it can also be t Note: We are interested in executing the function ONLY when the node connects. T

{{ Note|Do you have a radio interface not listed here? Let us know and we'll add it {{ Note|This solution is for advanced users and requires a steady hand and microsol

...; use DSP IIR 6 pole High pass filter, 300 Hz corner with 0.5 db ripple (note clients filter PL by default already) ; NOTE: there is NO "master" in this instance, since we already have a master timi

'''PLEASE NOTE!! - This section was copied from the old docs.allstarlink.org site to prese ...s the size of the compact flash device we inserted into the writer. Make a note of your device name as it will be required to write the disk image to the c

'''Note:''' this jumper affects the squelch calibration circuit only. Not to be con Note, if JP10 is inserted during this procedure, the "Diode Calibration" process

Note: There must be no spaces between the commas, numbers, or the parenthesis.

...e on the console and ask a question about them on the mailing list. Please note that the error message: '''WARNING[5765]: file.c:xxxx waitstream_core: Une

Note :

...default to zero (0). These alternate filters should be used with care. Note that additional computing power and radio adjustments may be necessary depe ...ilter combinations yield aliasing distortion/folding at or below -40 dBr. Note that all testing was done with the usbradio channel driver using discrimina

A final note about codec selection. There are quite a few codecs in Asterisk to choose f

{{ Note|'''This document is outdated and does not represent ASL Infrastructure as o ...ewall.sh and chmod +x it. You'll need to edit this based on the machine. Note the stuff in tampa uses a firewall on the HV too.

...enumber>''. Where <nodenumber> = the AllStar Link node of your system. ''Note that usb and the node number are separated by an underscore (_) character.' ...e usbradio.conf file from an older installation (i.e., ACID), take special note of the change in naming. chan_usbradio may not work without first making t

''' Note: These packages are already installed on beta-2.0.0 on Raspberry Pi. You wi

Remote node is already part of the network. Note that it could be a direct connection or it could be the node is connected v

Note, you will want to update your codeplug too, that is under the Tools --> Cod ...mes with vanilla V1.50 firmware), to use one of the versions with DSP/BEW. Note that due to space constraints, the DSP/BEW firmware is mutually exclusive w

{{ Note|'''Your first node will be automatically approved. Subsequent nodes are sub {{Note|If you're planning on using this as a radioless node, skip this step.}}

Note the below go in the node stanza in rpt.conf, not echolink.conf Note: Same network refers to the the Public IP address that both your AllStar no

; note the . wildcard doesn't work here in rpt.conf

The GPS connections for the RTCM are on the DB15 connector. Note that the labels for GTX and GRX are misleading. GTX is the data '''FROM''' Also note, inside the RTCM, there are jumpers to set for TTL or RS-232 data, dependin

Please note that there is no perfect way to tune dvs in all modes with dtmf... YET !

...each '''transmitter''', queuing it before sending it out over the air. '''Note:''' the ''Simulcast Launch Delay'' is additionally added to the ''TX Buffer

A note on the Motorola SLR5700 per VE7FET. DSP/BEW definitely makes a difference o '''NOTE:''' It ''is'' a valid configuration to hook up the VOTER hardware directly

''Note'': The value in quotes is the name of the autopatch caller, and the numbers ...nge the default function starting character of * to something else. Please note that the new value chosen must not be the same as the default or overridden

'''Note:''' Entering the diagnostic menu will kill a connection to the host (it int ...nostic suite, you will need to build the following test cables/connectors. Note that these instructions are for the RTCM, the connections will be different

...t at the same location as the above system, but may be, if appropriate. '''Note: currently this is accomplished using Allmon/Supermon for most monitoring s ...nsmitter and its line level (or MIC input, attenuated) and PTT signals. '''Note: in most applications, transmit audio must be routed through the mic input

''Editors note: Jim became a SK in December of 2016. My best guess it these articles were

Note: Master timing sources '''MUST''' be local to their associated server, and