Tonemacro use and format

A 'tonemacro' is much like a normal macro (see also Macro use and format )

Mutiple tones can each have their own macro execution. And each node may have it's own set. It activates the programmed macro/string based on a PL Tone received. Or NOT.

Note required that you are using dsp functions of USBRadio and proper tone config in the usbradio.conf required.

rxctcssfreqs=100.0,203.5 -USBRadio.conf

[tonemacro29284]

100.0=*671

203.5=*711

[tonemacro29285]

100.0=*672 *8910

203.5=*712

Use your imagination as this can be used very powerfully. But be careful in thinking out the full implications of what you are doing.