Difference between revisions of "Tonemacro use and format"
Jump to navigation
Jump to search
(Created page with "A 'tonemacro' is much like a normal macro (see also [https://wiki.allstarlink.org/wiki/Macro_use_and_format/ Macro use and format ]) Mutiple tones can each have their own ma...") |
|||
| Line 1: | Line 1: | ||
| − | A 'tonemacro' is much like a normal macro (see also [https://wiki.allstarlink.org/wiki/Macro_use_and_format | + | A 'tonemacro' is much like a normal macro (see also [https://wiki.allstarlink.org/wiki/Macro_use_and_format Macro use and format ]) |
Revision as of 21:27, 31 January 2023
A 'tonemacro' is much like a normal macro (see also Macro use and format )
Mutiple tones can each have their own macro execution. And each node may have it's own set.
It activates the programmed macro/string based on a PL Tone received. Or NOT.
Note required that you are using dsp functions of USBRadio and proper tone config in the usbradio.conf required.
rxctcssfreqs=100.0,203.5 -USBRadio.conf
[tonemacro29284]
100.0=*671
203.5=*711
[tonemacro29285]
100.0=*672 *8910
203.5=*712
Use your imagination as this can be used very powerfully. But be careful in thinking out the full implications of what you are doing.