WiFi on RASPI

From AllStarLink Wiki
Revision as of 14:26, 6 November 2022 by KB8JNM (talk | contribs) (→‎Other Pi's)
Jump to navigation Jump to search

WIFI is not a function of the app_rpt/ASL software. It is at operating system level.

4B

In order to connect to your ASL Node with a Raspberry Pi 4B using WiFi, you must use the command: "Sudo wifi-setup" at the command prompt. You will see further information and just follow the directions as you add requested information (SSID and router password). Once completed, reboot at the command prompt (Use "Sudo reboot").

Other Pi's

sudo raspi-config

See the Raspi documentation https://www.raspberrypi.com/documentation/computers/configuration.html#wireless-networking-command-line