Compiling

From AllStarLink Wiki
Revision as of 06:15, 2 May 2020 by imported>Kg7qin (→‎Build Asterisk for ASL)
Jump to navigation Jump to search

Compiling AllStarLink

The following commands will allow you to compile AllStarLink's ASL 1.01 release.

These instructions assume you are already familiar with compiling and installing software on Linux.

Note: These instructions are currently a Work In Progress. You are going to have to resolve dependency issues yourself if you follow them.

You will also need to have cloned the main AllStarLink repo at https://github.com/AllStarLink/Asterisk

DO NOT BLINDLY RUN THE COMMANDS HERE WITHOUT UNDERSTANDING WHAT THEY DO!!

This is for more advanced users. If you are a novice user at building software in a Linux environment or only prefer/can use plug and play/turnkey setups THEN THIS IS NOT FOR YOU TO TRY!

DO NOT TRY THIS ON A RASPBERRY PI UNLESS YOU KNOW HOW TO RESOLVE KERNEL SOURCE/DEPENDENCY ISSUES -- OTHERWISE YOU RUN THE RISK OF BLOWING UP YOUR SYSTEM!!

Install requirements for building

 apt-get install -y git build-essential linux-headers-$(uname -r) linux-source-4.9 libss7-dev wget apt-utils dahdi-source dahdi-linux aptitude tcsh gawk libusb-dev vim

Get DAHDI source files

 wget https://github.com/KG7QIN/AllStarLink/raw/master/dahdi/dahdi-linux-complete-2.10.2%2B2.10.2.tar.gz 

Asterisk Prereqs

 mkdir /etc/vpb
 apt-get build-dep asterisk -y
 apt-get purge -y libopenr2-3 libopenr2-dev
 dpkg --configure -a
 apt-get install -f

Extract and build DAHDI

 tar -zxf dahdi-linux-complete-2.10.2+2.10.2.tar.gz
 cd dahdi-linux-complete-2.10.2+2.10.2/linux/drivers/dahdi/voicebus/ 
 
 echo "--- GpakApi.c.orig	2018-06-09 18:54:14.205144479 -0700\n" \
 "+++ GpakApi.c	2018-06-09 18:54:28.196956036 -0700\n" \
 "@@ -1560,7 +1560,7 @@\n" \
 "     if (DspStatus != 0)\n" \
 "         return (RmmFailure);\n" \
 " \n" \
 "-	for (i = 0; i < MemoryLength_Word16; i++)\n" \
 "+    for (i = 0; i < MemoryLength_Word16; i++) \n" \
 "         pDest[i] = (short int) MsgBuffer[2 + i]; \n"  > patch1
 
 patch -ful GpakApi.c patch1
 
 cd dahdi-linux-complete-2.10.2+2.10.2/tools/xpp/
 sed -i -e 's/inline /extern inline /g' echo_loader.c
 
 cd dahdi-linux-complete-2.10.2+2.10.2/
 sed -i -e 's/configure /configure CFLAGS=-Wno-error /g' Makefile
 cd tools/xpp
 sed -i -e 's/-I. -Ixtalk -Wall -Werror/-I. -Ixtalk -Wno-error/g' Makefile
 cd ../..
 make distclean
 make
 make install
 make config

Install GCC 4.9 to compile ASL 1.01

 echo "deb http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list 
 echo "deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list
 apt-get update
 apt-get install -y gcc-4.9 g++-4.9

Build Asterisk for ASL

 cd Asterisk/asterisk
 make distclean
 ./configure CXX=g++-4.9 CC=gcc-4.9 LDFLAGS="-zmuldefs -lasound" CFLAGS="-Wno-unused -Wno-all -Wno-int-conversion"
 make menuselect.makeopts || :
 menuselect/menuselect --enable app_rpt --enable chan_beagle --enable chan_tlb --enable chan_usrp --enable chan_rtpdir --enable chan_usbradio --enable chan_simpleusb --enable chan_echolink --enable app_gps --enable chan_voter --enable radio-tune-menu --enable simpleusb-tune-menu menuselect.makeopts || :
 make
 make install
 make samples

Final

There is no guarantee this will work for you. Your mileage may vary.