Search results

...server (127.0.0.1) are allowed. The lists are managed with these Asterisk CLI commands: *CLI> database put blacklist 1998 "any comment"

From the Asterisk CLI, (to get into the Asterisk CLI, type asterisk -r from a root shell) set the receiver noise baseline (with

* New cli> command rpt lookup <node#> (ala HamVoIP) to resolve IP address of any node * Clean up output from cli>rpt localnodes

# Bring up the Asterisk CLI. # From the asterisk CLI, type <code>rpt fun yournodenumber *989</code> where <code>yournodenumbe

AllStar*CLI>iax2 show registry

If you wish to set channel variable(s) for a node from the CLI, you may use the following command: *CLI> rpt setvar <nodenum> <name=value> [<name=value>...]

* Then <code>*CLI> tar -xzvf ''fliename''.tgz; cd etc/asterisk</code> and <code>cp</code> all

= Asterisk CLI Commands = These are the CLI commands that Asterisk and chan/voter supports:

The voter ping asterisk CLI syntax is: *CLI>voter ping nameOfClient [packetCount]

=Linux CLI Editors=

...the previous HOWTO. Issue the command radio active usb1 from the Asterisk CLI to switch to the new USB interface (usb1) before starting the audio adjustm

...and see if you can access the Asterisk CLI. If you can access the asterisk CLI, then watch the console output while trying to connect and note what happen

StPeteRpt*CLI> dahdi show status

On the CLI when MDC-1200 is received the following will be displayed:

For users not familiar with linux and ASL, at the Linux CLI (command line interface)

Para los usuarios que no están familiarizados con Linux, ASL y Linux CLI (command line interface), pueden seguir paso a paso el procedimiento: