Allmon2 Install

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.

repeater@repeater:~$

Once you are there you have to type the following commands:

repeater@repeater:~$ sudo apt install git
repeater@repeater:~$ sudo git clone https://github.com/AllStarLink/AllMon2.git /var/www/html/allmon2
repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php

Configuration

Now you have to edit the allmon.ini.php file

repeater@repeater:~$ sudo nano allmon.ini.php

1. Change: the '500' number [500] to your node number.
2. Change: host=127.0.0.1:5038
3. Change: passwd=yourpassword
4. (note: 'llcgi' is the default password acording to the initial node setup)
5. Change: menu=yes

After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.

Example almond.ini.php with node(s) listed under a menu item. In this example named MySites.

[1234]
system=MySites
host=127.0.0.1
user=admin
passwd=yourpassword
nomenu=yes
[1234 My Node]
system=MySites
nodes=1234
[1234 My Node RTCM]
system=MySites
rtcmnode=1234

[1235]
system=MySites
host=127.0.0.1
user=tsawyer
passwd=yourpassword
nomenu=yes
[1235 Another Node]
system=MySites
nodes=2510

repeater@repeater:~$ htpasswd -cB .htpasswd admin
repeater@repeater:~$ chmod 777 astdb.php

Note: don't use an exclamation mark in the .htpasswd password.

Test and Use

Using your web browser go to:

Note: 192.168.x.x is your nodes IP.

http://192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.

Lighttpd Notes

If you are using Lighttpd, you must modify your configuration to work with Allmon2.

Add

server.stream-response-body = 2

to /etc/lighttpd/lighttpd.conf and restart lighttpd.