Backup Your Node

AllStarLink has a built-in back feature that is often overlooked. It stores all your configuration files on our server. Backups are very easy to create and restore.

Backup

To enable backups you'll need to set up the savenode.conf file as shown. Replace the node number and password with your node information.

Sample: /etc/asterisk/savenode.conf

NODE=1999
PASSWORD=123456
ENABLE=1

Then to create a backup type:

*CLI> savenode.sh

Restore

Point your browser at [Backup server] and enter your node number and it's password. You will see your last four backups in tgz format.