Permanent Node Connection

The following information will make your connection to another AllStarLink node persistent (permanent). Permanent connects survive network outages and far end reboots. However they do not automatically reconnect when commanded to disconnect by either end.

Configuration

The following commands should already exist in ASL 2.0 rpt.conf file under your [functions] stanza:

; Permanent link
81=ilink,11 ; Permanent link disconnect
82=ilink,12 ; Permanent link receive
83=ilink,13 ; Permanent link transcieve

If you would like a permanent connect automatically when your node boots you need a startup_macro. Under your node stanza (i.e., [XXXXX] where XXXX = your node number), usually near the end your will find a commented blank startup_macro=. Uncomment it (or add):

startup_macro=*83NNNNN

Where NNNNN is the node you wish to automatically connect.

Reload/restart your system and it will auto connect to the node you specified above.