Two Servers Behind NAT Router: Difference between revisions

Latest revision as of 14:54, 11 December 2024

@@ Line 1: / Line 1: @@
-Of course, it's possible to run more than one node per server. But if your server is low on resources (maybe a Pi) or you just want another server, it can be easily done. The concept is simple; because multiple servers behind a NAT router appear to have one public IP address, each server will need it's IAX own port.
+This page has been replaced with https://allstarlink.github.io/adv-topics/multinodesnetwork/.
-Instructions: [[Media:Two_ASL_servers_one_network.pdf|Two servers behind a NAT router]]
-The default IAX port is 4569 but if you already chosen another port for the first server, that's fine, you can use it. Just pick a different port for the other server.
-Remember to set the port you use for each server on allstarlink.org. If you forget this step external (to your network) nodes will not be able to connect.
 [[Category:How to]]
 [[Category:Node Configuration]]