Two Servers Behind NAT Router: Difference between revisions

Latest revision as of 14:54, 11 December 2024

@@ Line 1: / Line 1: @@
-Running more than one server on your home network or behind any NAT router is possible. The concept is simple; each server will have it's IAX own port. The PDF below shows how to set it up.
+This page has been replaced with https://allstarlink.github.io/adv-topics/multinodesnetwork/.
+[[Category:How to]]
-Instructions: [[Media:Two_ASL_servers_one_network.pdf|Two servers behind a NAT router]]
+[[Category:Node Configuration]]
-The default IAX port is 4569 but if you already chosen another port for the first server, that's fine, you can use it. Just pick a different port for the other server.
-Remember to set the port you use on allstarlink.org. If you forget this step external (to your network) nodes will not be able to connect.