View source for Standard Node vs Remote Base

=== Specifying a Standard Node and a Remote Base Node in rpt.conf ===
In the '''nodes stanza''', a remote base node is denoted when it is suffixed with a y option:
 [nodes] 
 1234 = radio@127.0.0.1/1234,y ; y or yes = Remote base node 
 5678 = radio@127.0.0.1/5678,NONE ; no or none = Standard node
In the above example node 1234 is a remote base node, and node 5678 is a standard node.

Important note:
Once designated as a remote base, it will only allow one connection for use and command and control
[[Category:How to]]