Allmon2 Install

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.

repeater@repeater:~$

Once you are there you have to type the following commands:

repeater@repeater:~$ sudo apt install git
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php

Configuration

Now you have to edit the allmon.ini.php file:

repeater@repeater:~$ sudo nano allmon.ini.php

1. Change: the '500' number [500] to your node number.
2. Change: host=127.0.0.1:5038
3. Change: passwd=yourpassword
4. (note: 'llcgi' is the default password acording to the initial node setup)
5. Change: menu=yes

After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.

repeater@repeater:~$ htpasswd -cB .htpasswd admin
repeater@repeater:~$ chmod 777 astdb.php

Test and Use

Using your web browser go to:

Note: 192.168.x.x is your nodes IP.

http://192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.

Lighttpd Notes

• • • If you are using Lighttpd, you must modify your configuration to work with Allmon2.

Add “server.stream-response-body = 2” to /etc/lighttpd/lighttpd.conf and restart lighttpd.