Standard Node vs Remote Base
Specifying a Standard Node and a Remote Base Node in rpt.conf
In the nodes stanza, a remote base node is denoted when it is suffixed with a y option:
[nodes] 1234 = radio@127.0.0.1/1234,y ; y or yes = Remote base node 5678 = radio@127.0.0.1/5678,NONE ; no or none = Standard node
In the above example node 1234 is a remote base node, and node 5678 is a standard node.
Important note: Once designated as a remote base, it will only allow one connection for use and command and control