Flashing the ASL Image

From AllStarLink Wiki
Revision as of 21:29, 29 June 2024 by N8EI (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Legacy Version - This page is about a legacy version of AllStarLink. See https://allstarlink.github.io/user-guide/pi-detailed/

For all operating systems, we recommend downloading and installing balenaEtcher. It's available for macOS, Windows, and Linux. If you're flashing for RaspberryPi, an SD card reader is required.

Download balenaEtcher

USB Thumbdrive (PC/Pi4)

1. Follow the directions below, but use a USB thumbdrive instead.

SD Card (Pi2-Pi4)

1. Open balenaEtcher

2. Insert your SD card into your SD card reader

3. Press "Select Image" and locate the downloaded image (e.g. ASL_1.01-20180228-armhf-raspbian-stretch-image)

4. If your SD card is ready to flash, you can simply press the "Flash!" button:

5. Insert your SD card into your Raspberry Pi and boot it up!

Retrieved from "https://wiki.allstarlink.org/index.php?title=Flashing_the_ASL_Image&oldid=7391"