TheLinkBox: Difference between revisions
mNo edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Category:How to]] | [[Category:How to]] | ||
It is possible to interface an app_rpt installation with TheLinkBox Program (by Skip, WB6YMH), using the chan_tlb channel driver. | It is possible to interface an app_rpt installation with TheLinkBox Program (by Skip, WB6YMH), using the chan_tlb channel driver. | ||
| Line 30: | Line 29: | ||
1001 = W6ABC,12.34.56.78,44966 ; This one is for W6ABC at ip 12.34.56.78:44966 default CODEC | 1001 = W6ABC,12.34.56.78,44966 ; This one is for W6ABC at ip 12.34.56.78:44966 default CODEC | ||
1002 = W1XYZ,11.22.33.44,1234,G726 ; This one is for W1XYZ at ip 11.22.33.44:1234 with G726 CODEC | 1002 = W1XYZ,11.22.33.44,1234,G726 ; This one is for W1XYZ at ip 11.22.33.44:1234 with G726 CODEC | ||
</pre> | |||
You can, if you wish, have multiple instances under different sections (such as [tlb1], etc) | You can, if you wish, have multiple instances under different sections (such as [tlb1], etc) | ||
as long as they are on different UDP port pairs. | as long as they are on different UDP port pairs. | ||
NOTE: The UDP port pair must start with an even port number. The even port is for the RTP (audio) | NOTE: The UDP port pair must start with an even port number. The even port is for the RTP (audio) | ||
and the odd port is for the RTCP (control/supervisory). | and the odd port is for the RTCP (control/supervisory). | ||
Insure /etc/asterisk/modules.conf loads chan_tlb.so: | |||
<pre> | |||
load => chan_tpb.so ;TheLinkBox Channel Driver | |||
</pre> | |||
On TheLinkBox side, you must specify the following in the main configuration file (generally | On TheLinkBox side, you must specify the following in the main configuration file (generally | ||
tlb.conf: | tlb.conf: | ||
<pre> | |||
RTP_Port = 44966 | |||
</pre> | |||
And you must have an entry if your ACL file (generally tlb.acl) for each app_rpt node as follows: | And you must have an entry if your ACL file (generally tlb.acl) for each app_rpt node as follows: | ||
<pre> | |||
allow WB6NIL 99.88.77.66 - -R | |||
</pre> | |||
This particular example would allow station WB6NIL-R access from ip 99.88.77.66. | This particular example would allow station WB6NIL-R access from ip 99.88.77.66. | ||
NOTE: You must be running at least version 0.47 of TheLinkBox to use this feature. | NOTE: You must be running at least version 0.47 of TheLinkBox to use this feature. | ||
Revision as of 14:46, 18 March 2021
It is possible to interface an app_rpt installation with TheLinkBox Program (by Skip, WB6YMH), using the chan_tlb channel driver.
The connection(s) are accessed and referred to by a locally-assigned (private) node number, staring with '1' (generally 1000-1999, as are any nodes not in the 'public' numbering space). Since the interface is unique to the app_rpt installation, other app_rpt stations must first connect to the app_rpt node(s) configured to connect with the desired TheLinkBox station(s).
Both TheLinkBox and app_rpt sides of the connection must choose a consecutive pair of UDP port numbers on which to communicate (ports 44966/44967 typically) and also must both be on static IP addresses.
TheLinkBox supports the codecs ULAW, G726 and GSM. The app_rpt side of the connection dictates which codec is to be used.
To enable TheLinkBox connectivity, there must be a file /etc/asterisk/tlb.conf specified as follows:
[tlb0] call=WB6NIL-R ; Call of the app_rpt station port=44966 ; Start of UDP port range (this port, port + 1) astnode=2008 ; app_rpt node associated with this instance (for incoming connections) context=radio-secure ; Asterisk context for incoming connections codec=ULAW ; Default CODEC to be used [nodes] 1001 = W6ABC,12.34.56.78,44966 ; This one is for W6ABC at ip 12.34.56.78:44966 default CODEC 1002 = W1XYZ,11.22.33.44,1234,G726 ; This one is for W1XYZ at ip 11.22.33.44:1234 with G726 CODEC
You can, if you wish, have multiple instances under different sections (such as [tlb1], etc) as long as they are on different UDP port pairs.
NOTE: The UDP port pair must start with an even port number. The even port is for the RTP (audio) and the odd port is for the RTCP (control/supervisory).
Insure /etc/asterisk/modules.conf loads chan_tlb.so:
load => chan_tpb.so ;TheLinkBox Channel Driver
On TheLinkBox side, you must specify the following in the main configuration file (generally tlb.conf:
RTP_Port = 44966
And you must have an entry if your ACL file (generally tlb.acl) for each app_rpt node as follows:
allow WB6NIL 99.88.77.66 - -R
This particular example would allow station WB6NIL-R access from ip 99.88.77.66.
NOTE: You must be running at least version 0.47 of TheLinkBox to use this feature.