Difference between revisions of "Two Servers Behind NAT Router"

From "AllStarLink Wiki"
Jump to: navigation, search
m
Line 1: Line 1:
Running more than one server on your home network or behind any NAT router is possible. The concept is simple; each server will have it's IAX own port. The PDF below shows how to set it up.  
+
Of course, it's possible to run more than one node per server. But if your server is low on resources (maybe a Pi) or you just want another server, it can be easily done. The concept is simple; because multiple servers behind a NAT router appear to have one public IP address, each server will need it's IAX own port.  
  
 
Instructions: [[Media:Two_ASL_servers_one_network.pdf|Two servers behind a NAT router]]
 
Instructions: [[Media:Two_ASL_servers_one_network.pdf|Two servers behind a NAT router]]
Line 5: Line 5:
 
The default IAX port is 4569 but if you already chosen another port for the first server, that's fine, you can use it. Just pick a different port for the other server.  
 
The default IAX port is 4569 but if you already chosen another port for the first server, that's fine, you can use it. Just pick a different port for the other server.  
  
Remember to set the port you use on allstarlink.org. If you forget this step external (to your network) nodes will not be able to connect.
+
Remember to set the port you use for each server on allstarlink.org. If you forget this step external (to your network) nodes will not be able to connect.
 +
 
 +
[[Category:How to]]
 +
[[Category:Node Configuration]]

Revision as of 17:30, 23 March 2018

Of course, it's possible to run more than one node per server. But if your server is low on resources (maybe a Pi) or you just want another server, it can be easily done. The concept is simple; because multiple servers behind a NAT router appear to have one public IP address, each server will need it's IAX own port.

Instructions: Two servers behind a NAT router

The default IAX port is 4569 but if you already chosen another port for the first server, that's fine, you can use it. Just pick a different port for the other server.

Remember to set the port you use for each server on allstarlink.org. If you forget this step external (to your network) nodes will not be able to connect.