Difference between revisions of "Duplex Mode 3"

From "AllStarLink Wiki"
Jump to: navigation, search
(Page created.)
(No difference)

Revision as of 17:19, 16 June 2019

This duplex mode allows a repeater (rather than app_rpt) to perform the repeat function. This is also known as in-cabinet repeat. Duplex Mode 3 is unique to repeaters and is not likely to be used on simplex, half-duplex nodes or hotspots. Setting duplex=3 in rpt.conf prevents Rx repeater audio from being sent to the repeater Tx. However, courtesy tones, morse code, voice messages and link audio are still sent to the repeater.

Duplex mode 3 might be used with a repeater where in-cabinet repeat cannot be disabled.


Notes to self: No audio delay. RTCM duplex mode 3.