Custom Repeater Splits

From "AllStarLink Wiki"
Revision as of 04:21, 28 January 2019 by N8THN (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


There are 2 ways of configuring custom repeater splits:

the new rpt.conf parameters (that go into the node stanza

in rpt.conf), are split2m and split70cm, which specify the

default offset for 2 meters and 70 centimeters in kilohertz.

split2m = 600
split70cm = 5000

You may also specify the offset in a memory channel

by adding an additional parameter before the options,

for example:

01 = 147.435,103.5,1035,h-t  ; This would be for W6NUT in Los Angeles with input of 146.40