Two Servers Behind NAT Router

From AllStarLink Wiki
Revision as of 17:13, 23 March 2018 by imported>Wd6awp
Jump to navigation Jump to search

Running more than one server on your home network or behind any NAT router is possible. The concept is simple; each server will have it's IAX own port. The PDF below shows how to set it up.

Instructions: Two servers behind a NAT router

The default IAX port is 4569 but if you already chosen another port for the first server, that's fine, you can use it. Just pick a different port for the other server.

Remember to set the port you use on If you forget this step external (to your network) nodes will not be able to connect.