Allmon2 Install

From AllStarLink Wiki
Revision as of 06:03, 18 January 2021 by KK9ROB (talk | contribs)
Jump to navigation Jump to search

Allmon2 Install

Allmon2 Install.

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.


repeater@repeater:~$


Once you are there you have to type the following commands:


repeater@repeater:~$ sudo apt install git

repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2

repeater@repeater:~$ cd /var/www/html/allmon2

repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php

repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php


Allmon2 Configuration.

Now you have to edit the allmon.ini.php file:


repeater@repeater:~$ sudo nano allmon.ini.php

  1. Change: the '500' number [500] to your node number.
  2. Change: host=127.0.0.1:5038
  3. Change: passwd=yourpassword
  4. (note: 'llcgi' is the default password acording to the initial node setup)
  5. Change: menu=yes


After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.


repeater@repeater:~$ htpasswd -cB .htpasswd admin

repeater@repeater:~$ chmod 777 astdb.php


Allmon2 Test and Use.

Using your web browser go to:


Note: 192.168.x.x is your nodes IP.

http:192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.