Allmon2 Install

From AllStarLink Wiki
Revision as of 06:05, 18 January 2021 by KK9ROB (talk | contribs)
Jump to navigation Jump to search

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.


repeater@repeater:~$


Once you are there you have to type the following commands:


repeater@repeater:~$ sudo apt install git

repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2

repeater@repeater:~$ cd /var/www/html/allmon2

repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php

repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php


Allmon2 Configuration.

Now you have to edit the allmon.ini.php file:


repeater@repeater:~$ sudo nano allmon.ini.php

  1. Change: the '500' number [500] to your node number.
  2. Change: host=127.0.0.1:5038
  3. Change: passwd=yourpassword
  4. (note: 'llcgi' is the default password acording to the initial node setup)
  5. Change: menu=yes


After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.


repeater@repeater:~$ htpasswd -cB .htpasswd admin

repeater@repeater:~$ chmod 777 astdb.php


Allmon2 Test and Use.

Using your web browser go to:


Note: 192.168.x.x is your nodes IP.

http:192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.