Difference between revisions of "Allmon2 Install"
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
</pre> | </pre> | ||
| − | == | + | == Configuration == |
Now you have to edit the allmon.ini.php file: | Now you have to edit the allmon.ini.php file: | ||
| Line 34: | Line 34: | ||
</pre> | </pre> | ||
| − | == | + | == Test and Use == |
Using your web browser go to: | Using your web browser go to: | ||
| Line 43: | Line 43: | ||
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | ||
| + | |||
| + | == Lighttpd Notes == | ||
| + | ***If you are using Lighttpd, you must modify your configuration to work with Allmon2. | ||
| + | |||
| + | Add “server.stream-response-body = 2” to /etc/lighttpd/lighttpd.conf and restart lighttpd. | ||
Revision as of 01:55, 8 March 2021
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
repeater@repeater:~$
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 repeater@repeater:~$ cd /var/www/html/allmon2 repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Configuration
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ sudo nano allmon.ini.php
- Change: the '500' number [500] to your node number.
- Change: host=127.0.0.1:5038
- Change: passwd=yourpassword
- (note: 'llcgi' is the default password acording to the initial node setup)
- Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
repeater@repeater:~$ htpasswd -cB .htpasswd admin repeater@repeater:~$ chmod 777 astdb.php
Test and Use
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
http://192.168.x.x/allmon2
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
Lighttpd Notes
- If you are using Lighttpd, you must modify your configuration to work with Allmon2.
Add “server.stream-response-body = 2” to /etc/lighttpd/lighttpd.conf and restart lighttpd.