Difference between revisions of "Allmon2 Install"

From AllStarLink Wiki
Jump to navigation Jump to search
 
(17 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
[[Category:How to]]
 
[[Category:How to]]
 
[[Category:Node Configuration]]
 
[[Category:Node Configuration]]
 
 
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
 
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
  
repeater@repeater:~$
+
repeater@repeater:~$
 
 
  
 
Once you are there you have to type the following commands:
 
Once you are there you have to type the following commands:
  
 
+
<pre>
 
repeater@repeater:~$ sudo apt install git
 
repeater@repeater:~$ sudo apt install git
 
+
repeater@repeater:~$ sudo git clone https://github.com/AllStarLink/AllMon2.git /var/www/html/allmon2
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
 
 
 
 
repeater@repeater:~$ cd /var/www/html/allmon2
 
repeater@repeater:~$ cd /var/www/html/allmon2
 
 
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
 
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
 
 
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
 
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
 +
</pre>
  
 +
== Configuration ==
  
 
+
Now you have to edit the allmon.ini.php file
==  Allmon2 Configuration.  ==
 
 
 
Now you have to edit the allmon.ini.php file:
 
 
 
  
 
repeater@repeater:~$ sudo nano allmon.ini.php
 
repeater@repeater:~$ sudo nano allmon.ini.php
Line 31: Line 23:
 
# Change: the '500' number [500] to your node number.
 
# Change: the '500' number [500] to your node number.
 
# Change: host=127.0.0.1:5038
 
# Change: host=127.0.0.1:5038
# Change: passwd=yourpassword
+
# Change: passwd=yourpassword  
# (note: 'llcgi' is the default password acording to the initial node setup)
+
# Note: 'llcgi' is the default password according to the initial node setup. However look at 'secret = xxxxx' in /etc/asterisk/manager.conf to be sure of the correct password.
 
# Change: menu=yes
 
# Change: menu=yes
  
 +
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
  
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
+
Example almond.ini.php with node(s) listed under a menu item. In this example named MySites.
 +
 
 +
<pre>
 +
[1234]
 +
system=MySites
 +
host=127.0.0.1
 +
user=admin
 +
passwd=yourpassword
 +
nomenu=yes
 +
[1234 My Node]
 +
system=MySites
 +
nodes=1234
 +
[1234 My Node RTCM]
 +
system=MySites
 +
rtcmnode=1234
 +
 
 +
[1235]
 +
system=MySites
 +
host=127.0.0.1
 +
user=admin
 +
passwd=yourpassword
 +
nomenu=yes
 +
[1235 Another Node]
 +
system=MySites
 +
nodes=2510
 +
</pre>
  
 +
== Password to Enable Buttons and Control Panel ==
  
 +
While in the /var/www/html/allmon2 directory
 +
<pre>
 
repeater@repeater:~$ htpasswd -cB .htpasswd admin
 
repeater@repeater:~$ htpasswd -cB .htpasswd admin
 
 
repeater@repeater:~$ chmod 777 astdb.php
 
repeater@repeater:~$ chmod 777 astdb.php
 +
</pre>
 +
Note: don't use an exclamation mark in the .htpasswd password.
  
 
+
== Test and Use ==
== Allmon2 Test and Use==
 
  
 
Using your web browser go to:
 
Using your web browser go to:
 
  
 
Note: 192.168.x.x is your nodes IP.
 
Note: 192.168.x.x is your nodes IP.
  
http:192.168.x.x/allmon2
+
http://192.168.x.x/allmon2
  
 
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
 
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
 +
 +
== Lighttpd Notes ==
 +
'''If you are using Lighttpd, you must modify your configuration to work with Allmon2.'''
 +
 +
Add
 +
server.stream-response-body = 2
 +
to /etc/lighttpd/lighttpd.conf and restart lighttpd.

Latest revision as of 20:43, 1 August 2021

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.

repeater@repeater:~$

Once you are there you have to type the following commands:

repeater@repeater:~$ sudo apt install git
repeater@repeater:~$ sudo git clone https://github.com/AllStarLink/AllMon2.git /var/www/html/allmon2
repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php

Configuration

Now you have to edit the allmon.ini.php file

repeater@repeater:~$ sudo nano allmon.ini.php

  1. Change: the '500' number [500] to your node number.
  2. Change: host=127.0.0.1:5038
  3. Change: passwd=yourpassword
  4. Note: 'llcgi' is the default password according to the initial node setup. However look at 'secret = xxxxx' in /etc/asterisk/manager.conf to be sure of the correct password.
  5. Change: menu=yes

After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.

Example almond.ini.php with node(s) listed under a menu item. In this example named MySites.

[1234]
system=MySites
host=127.0.0.1
user=admin
passwd=yourpassword
nomenu=yes
[1234 My Node]
system=MySites
nodes=1234
[1234 My Node RTCM]
system=MySites
rtcmnode=1234

[1235]
system=MySites
host=127.0.0.1
user=admin
passwd=yourpassword
nomenu=yes
[1235 Another Node]
system=MySites
nodes=2510

Password to Enable Buttons and Control Panel

While in the /var/www/html/allmon2 directory

repeater@repeater:~$ htpasswd -cB .htpasswd admin
repeater@repeater:~$ chmod 777 astdb.php

Note: don't use an exclamation mark in the .htpasswd password.

Test and Use

Using your web browser go to:

Note: 192.168.x.x is your nodes IP.

http://192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.

Lighttpd Notes

If you are using Lighttpd, you must modify your configuration to work with Allmon2.

Add

server.stream-response-body = 2

to /etc/lighttpd/lighttpd.conf and restart lighttpd.