Difference between revisions of "Allmon2 Install"
| Line 48: | Line 48: | ||
system=MySites | system=MySites | ||
host=127.0.0.1 | host=127.0.0.1 | ||
| − | user= | + | user=admin |
passwd=yourpassword | passwd=yourpassword | ||
nomenu=yes | nomenu=yes | ||
| Line 56: | Line 56: | ||
</pre> | </pre> | ||
| + | == Password to Enable Buttons and Control Panel == | ||
| + | While in the /var/www/html/allmon2 directory | ||
<pre> | <pre> | ||
repeater@repeater:~$ htpasswd -cB .htpasswd admin | repeater@repeater:~$ htpasswd -cB .htpasswd admin | ||
Revision as of 20:32, 1 August 2021
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
repeater@repeater:~$
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git repeater@repeater:~$ sudo git clone https://github.com/AllStarLink/AllMon2.git /var/www/html/allmon2 repeater@repeater:~$ cd /var/www/html/allmon2 repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Configuration
Now you have to edit the allmon.ini.php file
repeater@repeater:~$ sudo nano allmon.ini.php
- Change: the '500' number [500] to your node number.
- Change: host=127.0.0.1:5038
- Change: passwd=yourpassword
- (note: 'llcgi' is the default password acording to the initial node setup)
- Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
Example almond.ini.php with node(s) listed under a menu item. In this example named MySites.
[1234] system=MySites host=127.0.0.1 user=admin passwd=yourpassword nomenu=yes [1234 My Node] system=MySites nodes=1234 [1234 My Node RTCM] system=MySites rtcmnode=1234 [1235] system=MySites host=127.0.0.1 user=admin passwd=yourpassword nomenu=yes [1235 Another Node] system=MySites nodes=2510
Password to Enable Buttons and Control Panel
While in the /var/www/html/allmon2 directory
repeater@repeater:~$ htpasswd -cB .htpasswd admin repeater@repeater:~$ chmod 777 astdb.php
Note: don't use an exclamation mark in the .htpasswd password.
Test and Use
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
http://192.168.x.x/allmon2
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
Lighttpd Notes
If you are using Lighttpd, you must modify your configuration to work with Allmon2.
Add
server.stream-response-body = 2
to /etc/lighttpd/lighttpd.conf and restart lighttpd.