APT-GET Package pending for ASL1.10
Allmon is a web site for managing one or more app_rpt (aka Allstar) nodes. Each managed local node shows a list of connected nodes. The list is sorted in reverse order of the most recently received node. So the last node to talk is always at the top of the list. Any node that is currently being received will be highlighted by a green background as well as moving to the top of the list. The node list is updated once a second giving near- real-time status. Nodes may be grouped together when configuring Allmon. Groups enable two or mode nodes to be displayed on the same page. This can be handy if you use devices with smaller screens or you want to see a couple of your nodes at the same time. Don't try to display more than a few per group as performance will suffer. Logged in users can perform connect and disconnects. Users are maintained with the Apache htpasswd utility. There is only one login level, admin. Allmon will also monitor VOTER clients. Each VOTER instance displays a list attached Radio Thin Client Modules (RTCM). The RSSI for each RTCM is displayed in bar graph style along with a color to indicate the currently voted RTCM.
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git repeater@repeater:~$ sudo git clone https://github.com/AllStarLink/AllMon2.git /var/www/html/allmon2 repeater@repeater:~$ cd /var/www/html/allmon2 repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ sudo nano allmon.ini.php
- Change: the '500' number  to your node number.
- Change: host=127.0.0.1:5038
- Change: passwd=yourpassword
- (note: 'llcgi' is the default password acording to the initial node setup)
- Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
repeater@repeater:~$ htpasswd -cB .htpasswd admin repeater@repeater:~$ chmod 777 astdb.php
Test and Use
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
If you are using Lighttpd, you must modify your configuration to work with Allmon2.
server.stream-response-body = 2
to /etc/lighttpd/lighttpd.conf and restart lighttpd.