Search results
Jump to navigation
Jump to search
Page title matches
- This page discusses interfacing the Motorola Quantar to the RTCM/VOTER interface, for use with AllStar. This page should get you up and running with how to connect an RTCM to a Motorola Quantar (Quantro should be similar). These are just the basic ...18 KB (3,114 words) - 00:19, 5 June 2025
- The Radio Thin Client Module (RTCM) is [http://www.micro-node.com/thin-m1.shtml commercially available] hardwa The Micro-Node RTCM (and [[VOTER-Hardware | VOTER]]) interfaces are typically used with AllStar ...7 KB (1,101 words) - 00:19, 5 June 2025
- ...eable (it '''won't''' boot in the wrong device). Firmware specific for the RTCM is denoted by '''-smt''' in the filename. The VOTER uses a ''dsPIC33FJ128GP802'' and the RTCM uses a ''dsPIC33FJ128GP804''. There is different peripheral mapping between ...11 KB (1,821 words) - 00:20, 5 June 2025
- #REDIRECT [[RTCM Client]] ...25 bytes (3 words) - 01:40, 7 September 2017
- ...</code> channel driver is the interface between Asterisk and the [[VOTER | RTCM/VOTER]] radio/repeater hardware interface. It allows receiver voting, simul ...udio is desired without the "network audio delay" normally associated with RTCM/VOTER board operation, and for a radio that doesn't have the option of prov ...24 KB (3,770 words) - 00:20, 5 June 2025
- #REDIRECT [[RTCM Channel Driver]] ...33 bytes (4 words) - 02:17, 7 September 2017
Page text matches
- #REDIRECT [[RTCM Client]] ...25 bytes (3 words) - 01:40, 7 September 2017
- #REDIRECT [[RTCM Channel Driver]] ...33 bytes (4 words) - 02:17, 7 September 2017
- == VOTER/RTCM Feature == This option is also available in the VOTER/RTCM, via hidden menu. ...1 KB (177 words) - 02:08, 11 July 2025
- attached Radio Thin Client Modules (RTCM). The RSSI for each RTCM is displayed in bar graph style along with a color to indicate the currently voted RTCM. ...1 KB (225 words) - 21:24, 29 June 2024
- ...er than preventing a repeat audio path it provides one. In other words the RTCM performs in-cabinet repeat. This would be used to eliminate repeat audio de ...1 KB (201 words) - 18:10, 16 June 2019
- There are two types of buffers involved in the VOTER/RTCM. ...Menus#Main_Menu | TX Buffer Length]] parameter located on '''each''' VOTER/RTCM. ...6 KB (1,013 words) - 00:15, 5 June 2025
- ...ting and simulcast over IP networks with Allstar Radio Thin Client Module (RTCM). ...Quad Radio PCI card (EOL), the CM1x (USB), WM5102 (RPi), TLV320 (RPi) and RTCM. ...2 KB (329 words) - 12:39, 24 October 2024
- The RTCM/VOTER boards do support simulcasting, however, there are a bunch of quirks ...ou MUST inject a GPS-disciplined or OXCO 9.6MHz signal to the clock of the RTCM's, in lieu of their stock internal crystal. ...11 KB (1,853 words) - 00:17, 5 June 2025
- ...eable (it '''won't''' boot in the wrong device). Firmware specific for the RTCM is denoted by '''-smt''' in the filename. The VOTER uses a ''dsPIC33FJ128GP802'' and the RTCM uses a ''dsPIC33FJ128GP804''. There is different peripheral mapping between ...11 KB (1,821 words) - 00:20, 5 June 2025
- = RTCM Choppy Audio = The RTCM voter protocol is UDP which of course means packets can be dropped causing ...8 KB (1,297 words) - 02:57, 11 July 2025
- ...dios, repeaters and AllStarLink interfaces including USB Radio Interfaces, RTCM, GPS, URI/URI X and like devices. =RTCM/VOTER= ...11 KB (1,783 words) - 20:30, 21 March 2022
- The Radio Thin Client Module (RTCM) is [http://www.micro-node.com/thin-m1.shtml commercially available] hardwa The Micro-Node RTCM (and [[VOTER-Hardware | VOTER]]) interfaces are typically used with AllStar ...7 KB (1,101 words) - 00:19, 5 June 2025
- This page discusses interfacing the Motorola Quantar to the RTCM/VOTER interface, for use with AllStar. This page should get you up and running with how to connect an RTCM to a Motorola Quantar (Quantro should be similar). These are just the basic ...18 KB (3,114 words) - 00:19, 5 June 2025
- ...will outline the requirements and troubleshooting for using a GPS with the RTCM/VOTER. The RTCM/VOTER will work with most GPS available. It requires either NMEA or Trimble ...16 KB (2,484 words) - 00:16, 5 June 2025
- Audio is critical component of proper VOTER/RTCM operation, as well as node operation in general. This is an extensive topic ...there is an important consideration you need to make if you are using the RTCM/VOTER for voting. ...20 KB (3,248 words) - 00:15, 5 June 2025
- The VOTER/RTCM may be used in any of 3 modes: ...ed in an ''instance''. You might have this if you are just using the VOTER/RTCM as a RoIP adapter to connect a remotely located repeater back to a host ove ...24 KB (3,793 words) - 00:18, 5 June 2025
- .../unode_docs/rtcm_%20manual.pdf manual] for the RTCM or our [[RTCM_Client | RTCM Client]] page. That said, most of the information here should be applicable The Micro-Node RTCM (and [[VOTER-Hardware | VOTER]]) interfaces are typically used with AllStar ...13 KB (1,940 words) - 00:16, 5 June 2025
- ...</code> channel driver is the interface between Asterisk and the [[VOTER | RTCM/VOTER]] radio/repeater hardware interface. It allows receiver voting, simul ...udio is desired without the "network audio delay" normally associated with RTCM/VOTER board operation, and for a radio that doesn't have the option of prov ...24 KB (3,770 words) - 00:20, 5 June 2025
- ...d is now sold commercially as the [http://www.micro-node.com/thin-m1.shtml RTCM]. </i> ...mmercially-available [http://173.248.148.139/unode_docs/rtcm_%20manual.pdf RTCM] product. ...10 KB (1,615 words) - 00:24, 5 June 2025
- [1234 My Node RTCM] ...3 KB (501 words) - 21:24, 29 June 2024