Voter.conf

voter.conf

This file sets up the app_rpt interface to an RTCM. The RTCM may be used in any of 3 modes; non-voting client mode, voting mode or voting and simulcast mode. More information is available on the Allstar Projects page. The RTCM user manual available from the Micro-Node site has additional information.

[general]
port = 667
buflen = 180                 ; 120 min value that works at all
password = secret

[1234]
NORTH = secret1,transmit
SOUTH = secret2,master,transmit
WEST = secret3,nodeemp                   ; bypass deemphasis filter in RTCM  
EAST = secret4,transmit,noplfilter       ; bypass CTCSS filter in RTCM
; streams = 67.215.233.178:1667
; plfilter = y                            ; DSP high pass filter
; txctcss = 107.2                         ; This and next needed for app_rpt generated tone
; txctcsslevel = 20                       ; Transmit CTCSS level. Set to zero for off
; txtoctype = notone                      ; chicken burst 
thresholds = 255,110=5
linger=10