It is possible to interface an app_rpt installation with TheLinkBox Program (by Skip, WB6YMH), using the chan_tlb channel driver.
The connection(s) are accessed and referred to by a locally-assigned (private) node number, staring with '1' (generally 1000-1999, as are any nodes not in the 'public' numbering space). Since the interface is unique to the app_rpt installation, other app_rpt stations must first connect to the app_rpt node(s) configured to connect with the desired TheLinkBox station(s).
Both TheLinkBox and app_rpt sides of the connection must choose a consecutive pair of UDP port numbers on which to communicate (ports 44966/44967 typically) and also must both be on static IP addresses.
TheLinkBox supports the codecs ULAW, G726 and GSM. The app_rpt side of the connection dictates which codec is to be used.
To enable TheLinkBox connectivity, there must be a file /etc/asterisk/tlb.conf specified as follows:
[tlb0] call=WB6NIL-R ; Call of the app_rpt station port=44966 ; Start of UDP port range (this port, port + 1) astnode=2008 ; app_rpt node associated with this instance (for incoming connections) context=radio-secure ; Asterisk context for incoming connections codec=ULAW ; Default CODEC to be used [nodes] 1001 = W6ABC,184.108.40.206,44966 ; This one is for W6ABC at ip 220.127.116.11:44966 default CODEC 1002 = W1XYZ,18.104.22.168,1234,G726 ; This one is for W1XYZ at ip 22.214.171.124:1234 with G726 CODEC
You can, if you wish, have multiple instances under different sections (such as [tlb1], etc) as long as they are on different UDP port pairs.
NOTE: The UDP port pair must start with an even port number. The even port is for the RTP (audio) and the odd port is for the RTCP (control/supervisory).
Insure /etc/asterisk/modules.conf loads chan_tlb.so:
load => chan_tpb.so ;TheLinkBox Channel Driver
On TheLinkBox side, you must specify the following in the main configuration file (generally tlb.conf):
RTP_Port = 44966
And you must have an entry if your ACL file (generally tlb.acl) for each app_rpt node as follows:
allow WB6NIL 126.96.36.199 - -R
This particular example would allow station WB6NIL-R access from ip 188.8.131.52.
NOTE: You must be running at least version 0.47 of TheLinkBox to use this feature.