Difference between revisions of "Allmon2 Install"
Jump to navigation
Jump to search
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:How to]] | ||
| + | [[Category:Node Configuration]] | ||
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup. | The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup. | ||
| − | + | repeater@repeater:~$ | |
| − | repeater@repeater:~$ | ||
| − | |||
Once you are there you have to type the following commands: | Once you are there you have to type the following commands: | ||
| − | + | <pre> | |
repeater@repeater:~$ sudo apt install git | repeater@repeater:~$ sudo apt install git | ||
| − | |||
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 | ||
| − | |||
repeater@repeater:~$ cd /var/www/html/allmon2 | repeater@repeater:~$ cd /var/www/html/allmon2 | ||
| − | |||
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php | ||
| − | |||
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php | ||
| − | + | </pre> | |
| − | |||
== Allmon2 Configuration. == | == Allmon2 Configuration. == | ||
Now you have to edit the allmon.ini.php file: | Now you have to edit the allmon.ini.php file: | ||
| − | |||
repeater@repeater:~$ sudo nano allmon.ini.php | repeater@repeater:~$ sudo nano allmon.ini.php | ||
| Line 32: | Line 26: | ||
# (note: 'llcgi' is the default password acording to the initial node setup) | # (note: 'llcgi' is the default password acording to the initial node setup) | ||
# Change: menu=yes | # Change: menu=yes | ||
| − | |||
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''. | After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''. | ||
| − | + | <pre> | |
repeater@repeater:~$ htpasswd -cB .htpasswd admin | repeater@repeater:~$ htpasswd -cB .htpasswd admin | ||
| − | |||
repeater@repeater:~$ chmod 777 astdb.php | repeater@repeater:~$ chmod 777 astdb.php | ||
| + | </pre> | ||
| − | + | == Allmon2 Test and Use == | |
| − | == Allmon2 Test and Use | ||
Using your web browser go to: | Using your web browser go to: | ||
| − | |||
Note: 192.168.x.x is your nodes IP. | Note: 192.168.x.x is your nodes IP. | ||
| − | http:192.168.x.x/allmon2 | + | http://192.168.x.x/allmon2 |
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | ||
Revision as of 03:59, 20 January 2021
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
repeater@repeater:~$
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 repeater@repeater:~$ cd /var/www/html/allmon2 repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Allmon2 Configuration.
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ sudo nano allmon.ini.php
- Change: the '500' number [500] to your node number.
- Change: host=127.0.0.1:5038
- Change: passwd=yourpassword
- (note: 'llcgi' is the default password acording to the initial node setup)
- Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
repeater@repeater:~$ htpasswd -cB .htpasswd admin repeater@repeater:~$ chmod 777 astdb.php
Allmon2 Test and Use
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
http://192.168.x.x/allmon2
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.